RJM's unique fuel oil atomizers optimize particle size distributions for optimal combustion performance. Through laboratory flow calibration and laser Doppler scanning, these components assure that fuel throughput, droplet size distribution, injection velocities, and spray pattern are custom matched to your furnace and process requirements.

Benefits:

• Lower particulate and carbon emissions.
  
  
• Designed to fit your existing nozzle body (in most cases).

Most fuel atomizers currently on the market produce a significant number of large spray droplets (generally greater than 200 microns) that cannot completely burn out during the short time they are in the furnace. This results in excessive particulate emissions and carbon carry-over levels.

Customized to each oil burner, our oil atomizers produce a droplet size distribution equal to 150 SMD (Sauter Mean Diameter) average or less. The droplet size is purposely limited to the range of 10 to 200 microns to assure complete burnout and achieve significant reductions in fly ash carbon. Keeping atomized droplets from falling below the 10-micron range prevents the blue-white hydrocarbon plume, which is found when fuel is over-atomized.

Fuel Oil Atomizers are generally installed at the same time as staged Flame Stabilizers.